0.96 inch
SIZE 0.96inch
Display Mode Normally black IPS
Display Format Graphic 80RGB*160 Dot-matrix
Input Data SPI interface
Drive IC ST7735S
Dimensional outline 24(W)*30 (H)*2.8+/-0.1(T)mm
Resolution 80RGB*160 Dots
LCD Active area 10.8 (W)*21.7 (H)
Dot pitch 0.135(H) x 0.1356(V) mm
Viewing Direction All View
Operating Temperature -20～70°C
2.Pin Descriptions:
PIN No Symbol Description
1 GND Ground
2 VCC Power 3.3V
3 SCL Serial clock pin.
4 SDA Serial data input
5 RES LCM Reset pin
This pin is reset signal input. When the pin is low, initialization of the chip is
executed. Keep this pin pull high during normal operation.
6 DC Data/Command Control
7 CS Chip Select
8 BLK Backlight control pin
1.3 inch
1.Features
Display Mode Normally black IPS
Display Format Graphic 240RGB*240 Dot-matrix
Input Data SPI interface
Drive IC ST7789VW
Dimensional outline 27.78(W)*39.22 (H)*3.0+/-0.1(T)mm
Resolution 240RGB*240 Dots
LCD Active area 23.4 (W)*23.4 (H)
Dot pitch 0.0975(H) x 0.0975(V) mm
Viewing Direction All View
Operating Temperature -20～70°C
2.Pin Descriptions:
PIN No Symbol Description
1 GND Ground
2 VCC Power 3.3V
3 SCL Serial clock pin.
4 SDA Serial data input
5 RES LCM Reset pin
This pin is reset signal input. When the pin is low, initialization of the chip is
executed. Keep this pin pull high during normal operation.
6 DC Data/Command Control
7 BLK Backlight control pin
1.77 inchTFT LCD module:
1.8 inch TFT LCD module:
1.8-inch SPI serial port 128*160 Instructions
/*
Program default IO connection method:
sbit LCD_CS =P0^0; //chip select
sbit LCD_AO =P0^2; //data/command switch
sbit LCD_SDA =P1^5; // Data
sbit LCD_SCK =P1^7; //clock
sbit LCD_REST =P0^1; //reset
*/
●TFT power supply: screen power supply is 2.8-3.3V; remember not to use 5V
(modules with PCB have inherited 3V regulator IC , 5V can be input)
●Backlight power supply (LED pin): The maximum backlight power supply is 3.2V.
(5 ohm current limiting resistor can be connected in series under 3.3V power supply or 25 ohm resistor in series under 5V).
Product Description
- 2.4-inch color screen,support 65K color display,display rich colors
- 320X240 resolution, optional touch function
- Using the SPI serial bus, it only takes a few IOs to illuminate the display
- Easy to expand the experiment with SD card slot
- Provide a rich sample program
- Military-grade process standards, long-term stable work
- Provide underlying driver technical support
Product Parameters
| Name | Parameter |
| Display Color | RGB 65K color |
| SKU | have touch screen: MSP2402 |
| have no touch screen: MSP2401 | |
| Screen Size | 2.4(inch) |
| Type | TFT |
| Driver IC | ST7789V |
| Resolution | 320*240 (Pixel) |
| Module Interface | 4-wire SPI interface |
| Active Area (AA area) | 36.72×48.96(mm) |
| Module PCB Size | 77.18×42.72(mm) |
| Operating Temperature | -20℃~60℃ |
| Storage Temperature | -30℃~70℃ |
| VCC power voltage | 3.3V~5V |
| Logic IO port voltage | 3.3V(TTL) |
| Power Consumption | TBD |
| Rough Weight(Package containing) | No touch: 26(g) / With touch: 36(g) |
C***z –
I struggled a bit to make the Connexions But works as described.
K***i –
Works ok
A***v –
I took the display to work with Arduino. Initially there were problems-the image was not displayed at the full width of the screen. Did not work part of the display with a width of 32 pixels from the side opposite the train. Tried three different libraries. Wrote to the store, he sent an example of the code on C for MC family mcs51. I have adapted this code for Arduino and with it the display has earned in full width.
I***n –
Excellent!
S***n –
I went for a month, except for an anti-static bag and an envelope with one layer of pupyrki, there was no additional package, but the screen works with a miracle.
D***v –
Unfortunately, the display packaging did not save it from rigid transportation. Next to the photo is a box, which came in one package, in which there were capacitors.
M***a –
Everything works. Precision lame
A***y –
Everything is fine, everything works! Fully complies with the description
I***n –
Super.
G***r –
Item seem as should have not tested yet but pleased with delivery time 20 days to Canada
Z***m –
Fast shipping..!
S***y –
This is a very cheap and good product.
V***v –
Clear
L***n –
Works
M***D –
Received item thank you very much the Case got Damaged but Screen looks if it is ok
V***z –
According to the description.
Q***p –
Good Ombre
А***н –
The parcel arrived for 3 weeks in Latvia. I did not connect yet! I recommend the producer
Customer –
received
S***a –
Great goods!
D***n –
Still not tested, so possible post.
Z***x –
With description corresponds
M***e –
very good communication before and after sale. got the products exactly as described and ordered
N***v –
All OK!
F***v –
The goods arrived intact and safe (in a plastic container), as I will check, I will complement the feedback
V***v –
The screen is whole, but not yet checked.
T***y –
Wonderful. I ordered a bunch of all kinds of goods. All collected, packed and sent. Checked-everyone works. Delivered to the Yaroslavl region, less than a month. Thank you
B***t –
ok
M***3 –
The alien is well packed without damage, does it work does not test
V***K –
All is well
V***K –
Disk works
A***v –
Excellent all, I recommend!
A***n –
Are working
W***h –
Thanks excellent
T***r –
Everything! Quick run! Welcome again! Many thanks!