packing list:
1x 2560
1×3.2″ TFT LCD Touch
1x TFT 3.2″ Shield
1x USB Cable
Features:
LCD Panel:
High Quality Complete LCD w/ Touch screen Complete Module.
LCD screen + touch screen, with LCD & touch screen Controller.
8051 / AVR / PIC low power controller can also drive this LCD easily.
High portability! Increase development efficiency & lower development cost.
Specification:
Screen: 65K Colors
Driver IC: ILI9341
(Note: The old Version will be out of manufacture)
Size:57.54 (W) x 79.2 (H) x 4.40(T) mm
View area:48.60(W) x 64.80(H) mm
Display content:240RGB x 320 Dots
Resolution:240 x 3 x 320 Dots
Pixel dot size:67.5 (L) x 202.5 (W) um
Pixel order:STRIPE TYPE
Structure type:COG+FPC+BL+TP
Backlight type:WHITE LED
Working voltage is 3.3V.
Shiled:
3.2″ TFT LCD Shield,Can be directly to the 3.2 “TFT on the shields, can be compatible with the ardui-no
Funduino Mega 2560
The Mega 2560 is a microcontroller board based on the ATmega2560 .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Ardui-no Duemilanove or Diecimila.
The Mega 2560 is an update to the Ardui-no Mega, which it replaces
O***v –
Box was very good. Wrinkled, worried about the integrity of the opened like all elements of the whole, the performance is not verified.
R***r –
I bought mite for 2000 now costs 1500, in general it came and works, 4 stars for what is cheaper))) with the store did not communicate, it came for 18 days days days
Customer –
To the Mail Chelyabinsk for 13 days
A***v –
Who writes that the marriage of the display-you do not know how to use. Yes, I also have an example from the utft Library launched a mirror (first photo). You need to change the parameter in the initlcd.h file of the display driver. It was 0x48, need 0xC8 (in the second photo, as it should be). In the last photo, the result. The touch is also checked, everything is OK.
A***v –
Took for birduino. “Out of the box” did not work: the inscriptions were mirrored. I had to look for the source, edit the initialization of the display, calibrating the touchscreen.
F***r –
Hallo Everything great. It would be good if the Librery.h that needs the display would be mentioned.
K***v –
Everything is neatly packed, it was almost 3 weeks in M.O.
A***v –
The plume of the matrix was with a defect. There were horizontal bands on the screen. Opened the dispute, returned the requested amount. In general, the screen is normal. For birduino took-does not mirror.